Descripción: *
By using advanced, aerospace-grade thermoplastic for the shell, we've created a 2.58 pound helmet that's about half the cost of a composite helmet of comparable weight.
*
Rubberized matte finish actually incorporates Latex into the lacquer, which helps resist visible scratches and makes the entire surface act as a goggle gripper.
*
Plush inner lining is removable and washable.
*
Comes with 2 sets of cheekpads, to alter the sizing as your child grows
*
Meets or exceeds DOT and European ECE standards.
*
Comes with drawstring helmet bag.
*
Junior sizes S/M and L/XL

Descripción: Construido sobre de la plataforma de las rodilleras Launch,la codera Launch cuenta con una cáscara dura para el antebrazo y el codo para protección contra impactos. Chasis de biofoam moldeado.

Descripción: * Aggressively vented 10mm/8mm blended foam to keep you as cool as possible.
* Leatt Brace compatible.
* "Cheater" side straps allow adjustments to create a snug fit for even the skinniest kids.
* Large, ventilated, low-profile shoulder caps
* Full-length, open mesh base is breathable, smooth and comfortable enough to be worn directly against the skin.
* Wide, impact-dispersing, articulated back slider
* Four-point shoulder adjustment straps allow even, linear adjustment, and are both perimeter and “X" stitched for durability.
* PVC-coated mesh kidney belt with side compression adjustment tabs and hidden stash pocket.
* Adjustable length arms

Descripción: Un perfil trasero más profundo de EPS, ofrece una cobertura más amplia que un casco de XC tradicional.
La espuma de moldes de tecnología de moldeado de la cáscara externa en la EPS. La capa exterior cubre y protege el EPS de pequeños roces y golpes, y añade la integridad estructural con un ajuste moldeado.
Sistema de retención de Detox
Visor y el alerón.
20 rejillas de ventilación estratégicamente colocadas.
Normas de ensayo: la CPSC, CE: EN 1078, AS / NZS 2063

Descripción: Un perfil trasero más profundo de EPS, ofrece una cobertura más amplia que un casco de XC tradicional.
La espuma de moldes de tecnología de moldeado de la cáscara externa en la EPS. La capa exterior cubre y protege el EPS de pequeños roces y golpes, y añade la integridad estructural con un ajuste moldeado.
Sistema de retención de Detox
Visor y el alerón.
20 rejillas de ventilación estratégicamente colocadas.
Normas de ensayo: la CPSC, CE: EN 1078, AS / NZS 2063

Descripción: *
10mm thick, aggressively vented foam
*
Raised, reinforced spine and aggressive venting on the shin plate provides strength and optimal airflow.
* Grid-reinforced kneecap for high strength.
* Breathable, stretch Velcro straps on the thigh, knee and ankle offer excellent support and clean profile: no dangling strap ends ever.
* Set-and-forget calf strap design: adjust the sliders to your desired tension once, and it goes on the same every time.
* Hidden ABS plastic beneath the Velcro of the thigh cuff to resist the cuff lifting off of the leg.
*
Adult size, sold in pairs

Descripción: The LZ Shorty Knee Guards offer comfortable, lightweight protection with a minimal profile. They feature a tough, grid-reinforced knee cap, gripper TPR on the inside of the knees, and a soft, plush inner lining. Available in sizes S, M, L in white, size S in pink. Sold in pairs.

Descripción: * NEW! left/right specific design gives a more tailored look and feel
*
Raised, reinforced spine on shin plate features aggressive venting for maximum airflow
*
Aggressively vented 10mm foam base.
* Grid-reinforced kneecap for high strength.
* Set-and-forget upper calf strap design.
* Available in sizes S, M, L.

Descripción: #
Hand-laminated fiberglass shell
#
2.41 pounds
#
14 vents
#
Fully removable, washable liner and cheek pads
#
A subtle, pearlescent lacquered finish
#
Comes with drawstring helmet bag
#
Independent lab certified to CPSC and CE EN1078 standards, in-house lab tested to ASTM F1952 (DH) and F2032 (BMX) standards.
#
Comes in sizes S. M, L, and XL

Descripción: Protector de tobillos.
Uso: DH y Dirt Jump

Descripción: Protector de tobillos.
Uso: DH y Dirt Jump

Descripción: Casco de MTB

Descripción: El ukon cumple la Norma Europea EN 1078, referente a cascos para ciclistas.
El ajuste es sencillo gracias al sistema ErgoDial, que nos permite con sólo 2 dedos fijar una posición cómoda del casco, así mismo el acolchado interior no da sensación de agobio.
Proceso de fabricación: sistema In-Mold.
17 agujeros de ventilacion.
Con microajuste.
Peso: 290 gr.
Talle: Universal (54-61 cm).

Descripción: Protector de muñecas